new purchases, pics later

So I ordered my headstock decals yesterday and I also scored a piece of flamey maple on ebay for a super good price. Its 5 feet long, 9 inches wide, and an inch thick. I should be able to get at least 2 full sized body caps out of it depending on the size and shape of them, so if anyone wants me to build something, start thinking of a design.

Archtop progress

So far I've gotten quite a bit done in just 3 days of work. I'm not expecting to blow through this one, I'm taking as much time as I can in order not to screw it up, and making sure I have the instructor's assistance on everything I'm not sure about, especially when it comes to working with unfamiliar power tools. But anyways, so far I have my neck profile cut out, and the fretboard tapered. I have to clean it up still and put in my truss rod. After that I can glue down the fretboard and shape the neck and headstock. And eat the rest of my cheddar cheese pretzel Combos.

I forgot to add in earlier, my fretboard isn't really yellow. Its rosewood with a pretty nice looking grain pattern. The way the teacher advised us to do the taper is by coating the top with washable tempera paint and then drawing in the lines for the cuts, in order to not gouge up the wood in places we don't want gouges. It also makes the lines much easier to see when taking it to the bandsaw.

So that was actually last week that I did the neck stuff, but I forgot to take pics until yesterday. I did get my basswood blank glued together last week as well, and yesterday got it cut out on the bandsaw and sanded down to shape. This is actually a pic of the back of it, I forgot to take a pic before chambering, so I just snapped one of the back and reversed it for referrence.

Before I go any further, I'll explain the blue tape. there was a split in the basswood that just barely cut into my body shape. While sanding on the belt sander, a little chip broke off. After talking with Jim, the shop assistant, we decided that even though I'm binding the sides, it will help to have that extra bit of room to work with. So we glued it back in.

After the body was all sanded down, we did the routing. 3 passes, half inch or so at a time to create the sound cavities, making it a semi-hollowbody. I told Ian to remind me not to wear black next week. My clothing got covered in sawdust and wood shavings. It also made my allergies go nuts.

It can use a little cleaning up, and the top needs some sanding as well. Both the basswood and my Sequoia cap set a little funny, so I'm making some adjustments before gluing it together. I did get the cap cut out, but as I said, I'm sanding down the back of it to iron out any inconsistency and then I think we're gonna wet it to bend it down to glue on.

Thats just the rough shape. If you look closely, you'll see my pencil line on there that I'll eventually have to sand or rout down to. Thats all for this week unless i start on another shitar.

In other news

This is what i'm using to cap my archtop I'm working on... I promise to take some pics of the progress of that on saturday.

Super thick flamey Sequoia redwood. I'm lovin it

been awhile

So I pretty much finished what i'm now referring to either as the Shitar, or the Shitbox Git-box. I just need to make a few minor adjustments. I forgot to factor in the neck bow from using such a thin, weak piece of wood, so I gotta lower the action with thinner pieces for the bridge and nut. Here's some of the pics of the staining, tuners, my crap ass string tree i fashioned from a shard of broken pickguard, and everything else. I had tried to create a tobacco burst effect, but this was my first time working with stains and it turned out looking like poop. Hence the name... Oh, I also kinda like the way the back turned out, I just used a straight walnut stain, 2 coats. the way it soaked into the grain looks kinda cool to me.
I kinda forgot to take a full view of it strung up. I'll do that later